Publicité
Les langues disponibles
Les langues disponibles
A self contained LP-gas cylinder for use with this appliance must have a
capacity of 20.0 lbs. (height 18 inch, 460mm; diameter 12.2inch, 310mm).
The LP-gas supply cylinder to be used must be constructed and marked
in accordance with the specifications for LP-gas cylinders of U.S.
Department of Transportation (DOT) or the National Standard of Canada,
CAN/CSA-B339. The cylinder should be provided with a listed overfilling
prevention device and provided with a cylinder connection device
compatible with the connection for the appliance.
● The tanker is away form the fireplace 60 inch. (see below picture)
Assembly Instructions of Fountain
Step 1:
Unpack the contents of the box and check to make
sure that all items are accounted for and in good
condition.
Step 2:
Remove the pump wire plug and cylinder
pressure relief valve from the bottom of the
product. Select a flat, level surface for the
assembly and final location of your fountain.
10
60"
Step 3:
Attached the water supply tube underside of the fountain top to the tube
hole on the pump.
Step 4:
Add clean water into the fountain basin.
The water level should be between Gear 1 and Gear 2. Below Gear 1 the
water will dry out and above Gear 2 the water will overflow.
MAX
2
1
MIN
11
Publicité
