1.2.
Electrical features
Rated voltage:
Output voltage
Control voltage
Maximum motor current
Max input current
Maximum power input
Input power in sleep mode
1.3.
Using restriction
Min working temperature
Max working temperature
Min storage temperature
Max storage temperature
Relative humidity
Intermittent periodic duty
1.4.
Standards
Safety automatic electrical controls
CEM Immunity : test level 3
CEM Immunity : Electrical fast transient
CEM Immunity : Surge immunity test
1.5.
Accessories
This accessories are supply:
-
A bag with 4 fastening lug with 4 screws.
-
A bag with 4 plastic anchors (ø8mmx40mm) and 4 screws ø5.5mmx40mm.
-
4 cable ties.
-
1 drilling template.
1.6.
Specifications
This box is designed to control Coveo UL 300Nm (220 ft lb) pool cover motors.
After the limit switch initialization cycle, it is used to control movement of the cover between the open and
closed positions.
The speed is controlled at the beginning of the closing cycle so that the cover does not plunge.
For 20s, the speed is 2 rpm.
after that, the shaft speed is approximately 4 rpm
77.5121.0001
Single phase, 120Vac (±10%), 60 Hz.
20-28Vdc. (Without load, U<30Vdc)
12V ±5%
10A (electronic limitation)
3A
290 W (3A, PF=0.85)
6 W (70mA, PF=0.7)
-10°C/14°F
+40°C/104°F (with duty cycle 15% of 1hour)
-20°C/-4°F
+60°C/140°F
95% without condensation
Duty cycle type S3 : 3mn ON, 6mn OFF
Shaft speed when closing
Normal speed
Low speed ~=
½ normal speed for 20 s.
20 s
(1/29/2021)
UL 60730-1, CAN/CSA-E60730-1:15.
UL 2452
H.26 UL/CSA 60730-1
IEC 61000-4-4 level III
IEC 61000-4-3 level III
ENGLISH
Time
7/24