Publicité
Les langues disponibles
Les langues disponibles
3.2.
Wiring in the control box
M
3.3.
Connecting the motor cable to the cables from the control box
Filling with sealing
compounds like silicon
sealants, resin....
Cable from the motor
Use a waterproof underground junction box
3.4.
Wiring check
Before the first use:
Check the wiring.
Check the voltage: must be less than 30VDC at the red and black wire.
77.5121.0001
(not in supply)
(1/29/2021)
Assignment of the motor cable conductors to
terminal 1 and 2 depending on the position of
M
Motor
The voltage supplied
by the chlorinator
must come from a
class 2 transformer.
Power cable to the control box
(See section 3.2)
Connect with a proper
terminal and strain relief.
the motor in the pool.
Sensor cable to the control box
(See section 3.2)
ENGLISH
M
Motor
11/24
Publicité
