Lifescan OneTouch SureStep Guide D'utilisation page 35

DCO_05090602A_OTSS_OB_CA_ENG
Make sure a test strip is not in the meter
when you turn it on.
Next, the code number appears.
All manuals and user guides at all-guides.com
12/3/03
(Example)
1:27 PM Page 26
7. Compare the code number on the meter
display with the code number on the test
strip vial. If they do not
match, press the green
C button until the
codes match.
These two symbols will
alternate on the display. The meter is
now ready to perform a test. The meter
will turn off automatically after 2 minutes
if a test strip is not inserted.
Apply blood to
26
Insert test strip
test strip into meter