Publicité
Les langues disponibles
Les langues disponibles
CUSTOMER RESPONSIBILITIES TABLE
MAINTENANCE TASK
PRESSURE WASHER
Check/clean inlet screen.
Check high pressure hose.
Check soap and chemical hose and filter
Check gun and wand for leaks.
Purge pump of air and contaminants
ENGINE
Check oil level
Change engine oil
Clean air cleaner and precleaner
Clean/replace spark plug
Clean engine muffler & finger guard
Prepare for storage
Product Specifications
Pressure Washer Specifications
Pressure
Flow Rate
Cleaning Units (psi x GPM)
Engine Specifications
RPM
Rated Horsepower
Spark Plug Gap
Gasoline Capacity
Oil (22 oz. capacity)
All manuals and user guides at all-guides.com
MAINTENANCE
Before each use hours or yearly
x
x
x
x
x
x
Prepare unit for storage if it is to remain idle for longer than 30 days.
2400
2.4 GPM
5760
3600
6.0
.030" (0.76mm)
1.5 quarts
SAE 30 weight
11-ENG
Every 25
Every 50
hours or yearly
x
General Recommendations
The warranty of the high pressure washer does not
cover items that have been subjected to operator
abuse or negligence. To receive full value from the
warranty, operator must maintain high pressure washer
as instructed in this manual.
Some adjustments will need to be made periodically to
maintain your high pressure washer.
Once a year you should clean or replace the spark
plug, and clean or replace the air filter, and thoroughly
check the gun and wand assembly for wear. A clean
spark plug and clean air filter assure proper fuel-air
mixture and help your engine run better and last longer.
NOTE: Over time the o-rings in the gun assembly
become worn. Attached to your owners manual is a
replacement o-ring and split backup ring.
O-ring
Every 100
hours or yearly
x
x
x
Split Backup
Ring
D20590
Publicité
