De Dietrich DME388 Serie Guide D'utilisation page 28

99627812_ML_A.qxd 27/03/03
Dimensions for installation use
The oven has an high-performance air circulation system which gives remarkable results for
cooking and cleaning, as long as the following points are applied:
The oven may be fitted either underneath a work surface or in a suitable sized column
unit. Cut a hole measuring 50 mm x 50 mm in the back wall of the insert space for the elec-
tric cable to pass through (See diagram, left).
Centre the oven in the unit, and make that it is at least 2 mm from any other unit be-
side it.
The unit must be heat-resistant (or covered with heat-resistant material).
The oven must be disconnected from the power supply while it is being installed in the
unit.
For greater stability, fix the oven in the unit with 2 screws in the holes on the side
uprights (see diagram). Make a 3 mm diameter hole in the side of the unit first to prevent
the wood from splitting.
28
16:07 Page 28
All manuals and user guides at all-guides.com
20
50
540
560
22
380
595
560-580
310
400
550 mini
560-580