Rothenberger 56051 Instructions D'utilisation page 10


Fix both wheels in the middle using both splints. Bend the
splints open at the ends to secure them.
 Turn over the transport wagon and put it on its wheels.
Holder for the footswitch (see Fig. B):
 Loosen both holders for the footswitch on the transport wagon and mount opposite to each
other.
Prepare the machine adaptor (see Fig. C):
Slotted holes = mount for the thread-cutting machine (retaining bolt+washer+bolt),
Bores = mount for the ROWELD P160 Saniline (washer+bolt).
 Position the retaining bolts (4) each in the middle of the 4 slotted holes and tighten slightly
from below with a washer (3.2) and bolt (3.1).
 Open the Allen screws for the pillars on the thread-cutting machine beforehand and tighten
firmly after insertion on the retaining bolt(s)!
Only tighten the retaining bolt(s) when the machine is positioned correctly! There
should always be two people working to position the machine!
Fold out the transport wagon (see Fig. D):
 Unscrew the star grip (1.2) until the threaded rod no longer touches the frame.
Attention, risk of entrapment! The transport wagon is under spring pressure!
Only to be operated by 1 person!
 Press the transport wagon downwards with one hand and secure with the foot against it roll-
ing away.
 Loosen the locking bolt (1.1) with the other hand, then unfold the transport wagon until the
locking bolt engages completely in the 2nd bore.
 Also screw the star grip (1.2) into the 2nd bore on the frame.
Ensure that the star grip and locking bolts are firmly locked!
5 Care and Maintenance
Regularly check the transport wagon for damage and material fatigue.
Store the transport wagon at a dry, clean and frost-protected location.
Never use aggressive cleaning agents for cleaning!
6 Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RoService+ online:
+ 49 (0) 61 95 / 800 – 8200
Phone:
+ 49 (0) 61 95 / 800 – 7491
Fax:
Email: service@rothenberger.com
www.rothenberger.com
7 Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
6
All manuals and user guides at all-guides.com
ENGLISH