Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9. Troubleshooting
10. Exploded Diagram and Maintenance
Thank you for using APH3 INVERBOOST swimming pool heat pump for your pool heating, it will heat your pool
water and keep the constant temperature when the air ambient temperature is at -20 to 50℃
ATTENTION: This manual includes all the necessary information with the use and the installation of your
heat pump.
* The installer must read the manual and attentively follow the instructions in implementation and maintenance.
* The installer is responsible for the installation of the product and should follow all the instructions of the
manufacturer and the regulations in application. Incorrect installation will invalidate the guarantee.
* The manufacturer declines any responsibility for the damage caused by any third party, object ingression and
of the errors due to the installation that do not follow the manual guidelines. Any use that is not as intended by
the manufacturer will invalidate the guarantee.
WARNING:
Important notice:
Please always keep the heat pump in a well ventilated place and away from anything which could cause fire.
Do not braze or weld the pipe if there is refrigerant inside machine. Please do not charge the gas when in a
confined space.
Please always empty the water in heat pump during winter time or when the ambient temperature drops below
0℃, or else the Titanium exchanger will be damaged because of being frozen, in such case, your warranty will
be lost.
Please always cut the power supply if you want to open the cabinet to reach inside the heat pump.
The vacuum must be made to the heat pump before charging the R32 gas through the shut-off valve, located
inside the machine.
Please keep the display controller in a dry area to protect the display controller from being damaged by
humidity.
Action of filling gas must be conducted by professional with R32 operating license.
INDEX
INDEX
INDEX
- 10 -
Publicité
Chapitres
Table des Matières
