• Recommended ambient temperature for charging is 41 °F to 95 °F / 5 °C to 35 °C.
The battery may not charge properly or at all under extreme low or high temperatures.
• Recommended ambient temperature for shaving is 60 °F to 95 °F / 15 °C to 35 °C.
• Do not expose the shaver to temperatures higher than 122 °F / 50 °C for extended
periods of time.
• When the shaver is connected to an electrical outlet, it may take some minutes until
the display illuminates.
Shaver display
Charge status
The shaver display (5) shows the charge status of the battery when connected to an
electrical outlet:
• During charging the respective battery segment will blink.
• When fully charged all battery segments will light up for a few seconds then the
display turns off.
Low charge
The low-charge light
to finish your shave. With switching off the shaver a beep sound reminds of the low
charge status. The last 9 minutes of remaining shaving time are displayed in digits
(depending on your model / display).
Cleaning status (only models with Clean & Charge Station)
The cleaning indicator
Clean&Charge Station.
Travel lock
The lock symbol
lights up when the shaver has been locked to avoid unintended
starting of the motor (e.g. for storing in a suitcase).
Using the shaver
Press the on/off switch (4) to operate the shaver.
Tips for a perfect dry shave
1. Always shave before washing your face.
2. At all times, hold the shaver at the right angle (90°) to your skin.
3. Stretch your skin and shave against the direction of your beard growth.
MultiHeadLock switch (head lock)
To shave hard-to-reach areas (e.g. under the nose) slide the MultiHeadLock switch (3)
down to lock the shaver head. The shaver head can be locked in five positions.
To change position, move the shaver head with your thumb and forefinger back or forth.
It will automatically click into the next position.
All manuals and user guides at all-guides.com
flashes red when the battery is running low. You should be able
lights up when the shaver needs to be cleaned in the
(see fig. A)
9