Braun Wet&dry 9 Serie Mode D'emploi page 13

The cleaning cartridge can be disposed of with regular household waste.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem Possible reason
SHAVER
Shaver does 1. Travel lock is activated.
not start when 2. This appliance can only be
pressing the
start button.
Shaver does Ambient temperature is out of
not charge valid range.
completely and
keeps blinking.
Charging does 1. Shaver is not placed
not start when
connected to
power socket or
put in charging 2. Sometimes charging could
stand /
Clean&Charge
Station. 3. Ambient temperature is out
4. Special cord set is not
Unpleasant 1. Shaver head is cleaned
smell from the
shaver head. 2. Cleaning cartridge is in use
Battery 1. Shaver head is regularly
performance
dropped
significantly. 2. Foil and cutter are worn
All manuals and user guides at all-guides.com
operated cordless.
properly in the charging
stand / Clean&Charge
Station.
start delayed (e.g. after
long storage).
of valid range.
plugged in properly.
with water.
for more than 8 weeks.
cleaned with water but not
lubricated.
which requires more power
for each shave.
Remedy
1. Press the on/off switch for 3
seconds to unlock the shaver.
2. Unplug the shaver.
Recommended ambient temperature
for charging is 41 °F to 95 °F / 5 °C to
35 °C.
1. Contacts of shaver need to align
with contacts in the Clean&Charge
Station.
2. Wait a few minutes, if charging will
start automatically.
3. Recommended ambient
temperature for charging is 41 °F to
95 °F / 5 °C to 35 °C.
4. Special cord set needs to snap into
place.
1. When cleaning the shaver head with
water only use hot water and from
time to time some liquid soap
(without abrasive substances).
Remove Foil & Cutter cassette to let
it dry.
2. Change cleaning cartridge at least
every 8 weeks.
1. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil once a
week for lubrication.
2. Replace Foil & Cutter cassette.
13