Chauvet BEAMSHOT Manuel De Référence page 4

All manuals and user guides at all-guides.com
BEAMshot™ QRG EN
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 62 BEAMshot™ products at 120 VAC and 100 units at
230 VAC.
Fuse
1. Disconnect the product from power.
Replacement
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the Safety Notes.
Mounting Clamp
Safety Cable
Hanging/Mounting
Bracket
Mounting
Diagram
Bracket
Adjustment
Knobs
4