Publicité
HELI -
SCALE
Copyright ® 2012 - Reproductions interdites
www.heli-scale.fr
(ALL): Screw the body retainer at the pre-installed new Canopy posts. Adjust the retainer to just
contact the fuselage, then re-center the dome and use a pen to mark at the retainer mounting holes as
shown below.
Drill the holes at the marks and screw on the Retai-ners. Maybe glue in some wood stiffeners before.
Note: These fitting must be there, be strong bolted (Locktite) and they play a big role in taking the
tension of the main belt into the mechanics. See the samples right below.
Pour / FOR (REX):
Publicité
