Télécharger Imprimer la page

PFB R4M Notice D'utilisation Et D'entretien page 15

Publicité

2.2 Montaggio della Fune
- I tenditori a molla R4M/R4MS vengono forniti con la molla compressa nella posizione
di lavoro e registrata presso PFB con il dado (4) verniciato per sigillatura. Una volta
montata la fune (11) che collega la puleggia del tenditore con quella del limitatore di
velocità, è assolutamente necessario applicare un tiro sulla fune che garantisca di
mantenere la molla compressa nella stessa posizione registrata in PFB, dopodiché è
necessario svitare il dado (4) e riportarlo in alto contro l'altro dado. (vedi Fig. 4 / Fig.
4A)
- In combinazione con limitatori di velocità con puleggia d. 120 e 150mm le funi
utilizzabili sono le seguenti:
Funi 6 / 6,5mm: Drako 250T / Pawo 819W / Pawo F7S / Multilift / Elstar 8WS.
- In combinazione con limitatore di velocità con puleggia d. 180 mm, le funi utilizzabili
sono le seguenti:
Fune d. 6 mm a trefoli in acciaio.
Fune d. 6,5 mm Drako 250T / Pawo 819W / Pawo F7S / Multilift / Elstar 8WS.
- In combinazione con limitatore di velocità con puleggia d. 200 mm le funi utilizzabili
sono le seguenti:
Fune d. 6 - 6.5 mm a trefoli in acciaio.
2.2 Rope Mounting
- The spring tensioners R4M/R4MS are supplied with the spring compressed in the
working position settled in PFB with the nut (4) panted for sealed. Once the cable
(11) which connects the pulley of the tensioner with the overspeed governor is
mounted it, it is absolutely necessary to apply a pull on the rope which guarantees to
keep the compressed spring in the same position as settled in PFB, after this it is
necessary to unscrew the nut (4) and bring it back up against the other nut. (see Fig.
4 / Fig. 4A)
- In combination with overspeed governors with pulley diam. 120 and 150mm the
usable ropes are the following:
Rope made in steel wire d. 6 / 6.5mm Drako 250T / Pawo 819W / Pawo F7S /
Multilift / Elstar 8WS.
- In combination with an overspeed governor with pulley d. 180 mm the usable ropes
are the following:
Round strand rope made of steel wire d. 6 mm
Rope made in steel wire d. 6,5 mm Drako 250T / Pawo 819W / Pawo F7S / Multilift /
Elstar 8WS.
- In combination with an overspeed governor with pulley d. 200 mm the usable ropes
are the following:
Round strand rope made of steel wire d. 6 - 6.5 mm.
pag. 15

Publicité

loading

Ce manuel est également adapté pour:

R4ms