ENGLISH
F INSTRUCTIONS FOR USE
1
Before use, ensure the hair is clean, dry and tangle-free.
2
For extra protection use a heat protection spray.
, Hairsprays contain lammable material – do not use while using this
product.
3
Section the hair prior to styling. Style the lower layers irst.
4
Plug the product into the mains power supply.
, CAUTION : the appliance will begin to heat-up as soon as the power supply
is switched on.
5
The lid should be in the down position until the rollers are ready to use.
6
Rollers will be ready in 90 seconds. Allow 3 to 5 minutes for best results.
7
For the most eicient heating, place the large rollers on the irst 3 heated
bars.
8
When you feel your setters are ready, open the lid for 1 minute and begin
use.
, TO CURL
9
Select the desired size of roller. Use the medium rollers for tighter curls; the
larger rollers give looser curls and waves.
10 Take a section of hair, about the width of the roller.
11
Wrap the ends of the hair around the roller, keeping the hair at right angles
to the scalp.
12
Wind the roller right down to the roots.
13
Secure the roller irmly in place with the clips as near to the scalp as possible.
14 Repeat with the next section of hair.
15 Leave all the rollers in the hair until the rollers and hair have fully cooled
down and set the style.
, Note: Use ixing spray to help set and keep your style for longer
16 For a soft, wavy curl, use the rollers for only a couple of minutes. For a
tighter curl, leave the rollers in the hair for 5-10 minutes.
17
Rollers will remain actively curling for approximately 15 minutes.
18 Remove the rollers from your hair by removing each clip and gently
unwinding.
19 Let the curl spring back into place and leave the hair to cool fully before
styling to ensure the optimum set.
, FOR VOLUME
20 Use the large rollers provided.
21 Roll the top, front layer of the hair back to your crown, using one roller.
4