Heath Zenith 6108 Mode D'emploi page 2

SEE pAgES 3 ThrOugh 5 FOr dETAILEd INSTruCTIONS FOr INSTALLINg
SOURCE
GREEN
(Ground)
FROM
POWER
SOURCE
GREEN
(Ground)
WHITE
FROM
POWER
SOURCE
BLACK
GREEN
(Ground)
*COMMON-Used for illustrative purposes only. Check Your Switch. The common may be in a different
location, depending on the brand of your switch.
RED is used to represent the second wire between two standard three-way switches. This may not be
the color used in all installation. If you are not sure about your wiring, call an electrician for instal-
lation help. There is also a RED wire on the 6108 switch. Check the instructions above closely and
do not confuse the two.
All manuals and user guides at all-guides.com
ANd wIrINg ThE 6108 wALL SwITCh.
TYPICAL 3-WAY INSTALLATION
WHITE
FROM
POWER
*COMMON
BLACK
6108 SWITCH 1
WHITE
BLACK BLACK
6108
6108 SWITCH 2
ADD JUMPER WIRE
*COMMON
RED
(In Wall)
BLACK
EXISTING
3-WAY SWITCH
WHITE WHITE
*COMMON
RED
(In Wall)
BLACK
IN CIRCUIT
ST
WHITE
ADD JUMPER WIRE
*COMMON
BROWN RED
(In Wall)
RED BLACK
(From 6108)
EXISTING
3-WAY SWITCH
IN CIRCUIT
ND
WHITE
BROWN
RED
(From 6108)
2
BLACK
WHITE
BLACK
WHITE
BLACK
BLACK
6108
598-1233-03