Jensen PADIN5 Instructions D'installation Et D'opération page 9

PADIN5
TROUBLESHOOTING
Problem Cause
Does not operate (display does No power to yellow wire No
not light) power to red wire
Inline fuse blown
No power to unit Inline fuse blown
No speakers operate Speaker harness not con-
nected
Not all speakers operate Incorrect splices or connec-
tions
Speaker wires shorting to chas-
sis ground or to each other
Blows fuses Power wire shorting to ground
Speaker wires shorting to
ground
Incorrect fuse/fuse too small
CD skips too much Receiver mount is not solid or
backstrap is not secure
For technical assistance, please visit www.asaelectronics.com.
Corrective Action
Check connection with test
light.
Check fuse with test light.
Replace fuse
Check/replace fuse
Connect speaker harness.
Check speaker wires.
Check all splices and connec-
tions.
Check splices and connec-
tions.
Make sure wire is not pinched.
Make sure wire is not pinched.
Install fuse of correct rating.
Check mounting and back-
strap and tighten if needed.
7