Publicité
Les langues disponibles
Les langues disponibles
PADIN5
Wiring
Perform the following steps to install the radio using a wiring adapter
(purchased separately):
1.
Splice or crimp wires.
2.
Attach wiring adapter to vehicle wiring harness.
3.
Re-connect the battery negative terminal and test radio operation to
confirm correct wiring.
Jensen Connector
Rear Radio Controls and Connectors
1.
MICROPHONE CONNECTIONS
See "Using Microphones" on page 6.
2.
IR CONNECTIONS
See "AUX IR and DVD IR Connections" on page 5.
3.
RADIO IN LOW/HIGH SWITCH
•
Select "LOW" when you are using low-level RCA radio input (RADIO
LOW-IN).
•
Select "HIGH" when using hi-level radio input (RADIO HI-IN).
4.
RCA CONNECTIONS
•
RADIO LOW-IN: Connect to the RCA output from your radio.
•
AUX IN 1 and AUX IN 2: See "AUX RCA Connections" on page 5.
•
AUDIO OUT: Connect to an additional amplifier.
5.
HIGH LEVEL WIRING CONNECTIONS
See Table 1 on page 4 for specific wiring connections.
1
2
DVDB01 Connector (DVD Player Sold Separately)
DVD IR
1
2
3
5
3
4
Publicité
