Wolf Garten LI-ION POWER 60 Mode D'emploi page 14

Maintenance
Replace batteries
1. Remove cover
Place a coin in the cover slot and press
in the direction of the blade (1). Remove
the cover from above (2).
2. Replace batteries
Remove both plugs from the batteries
(3); remove the batteries from the
shears. Place the new batteries in the
shears and connect the two plugs.
Spare parts
Order description
AC-TS
Telescopic handle
Accu 8 EM
Shear blade
Accu 10 EM
Shear blade
Accu BS EM
Shrub blade
AC-R
Replacement blades
Accu
Charger (UK)
Charger (international)
Technical data
Noise measurement at operator ear
level in accordance with EN 836.
Vibration measured at the handle
with operator according to EN 1033.
The assessed acceleration typically
amounts to:
16
All manuals and user guides at all-guides.com
L
M
Item number.
7095 000
7084 095
7085 095
7095 095
7084 094
7084 918
7085 918
7086 918
7085 069
7087 068
LI-ION
POWER 60
Lp = 72 dB
(A)
< 2,5 m/s
3. Fastening the cover
Push the lid with the projection (4) under
the edge of the shears and then press
the cover on the shears (5).
Note: Please ensure that no cable
protrudes from the shears when fastening
the cover!
Product information
Continuously adjustable from 85-120 cm.
Result: convenient trimming without stooping.
(LI-ION POWER 60 / 80 / 100 / BS 80)
Cutting width 80 mm
(LI-ION POWER 60 / 80 / 100 / BS 80)
Cutting width 100 mm
(LI-ION POWER 100 / BS 80)
Length 170 mm (LI-ION POWER 100 / BS 80)
Result: The wheels achieve a consistent cutting height
(LI-ION POWER 60 / 80 / 100)
LI-ION POWER 60
LI-ION POWER 80
LI-ION POWER 100 / BS 80
LI-ION POWER 60 / 80 / 100 / BS 80
LI-ION
POWER 80
Lp = 72 dB
(A)
2 2
< 2,5 m/s
N
LI-ION LI-ION
POWER 100 POWER BS 80
Lp = 72 dB Lp = 72 dB
(A) (A)
2
< 2,5 m/s < 2,5 m/s
2