English
When it is necessary to attach ReTurnBelt to ReTurn7500
ReTurn7500
ReTurn7500:
Do not secure the clasp on the ReTurnBelt before rising. When the user is in a standing position facing the ReTurn, the strap
can be placed around one of the vertical handles.
Secure the clasp on the ReTurnBelt. A click is heard when the clasp is secured (Image 1).
ReTurn7500, with opening on the upper vertical handle:
Fasten the clasp on the ReTurnBelt without tensioning the strap. A click is heard when the clasp is secured.
When the user is in a standing position facing the ReTurn, the strap is passed through the opening in the upper vertical
handle and placed against the middle support bar (Image 2).
Now, transfer the user with ReTurn. Plan carefully to ensure that the transfer is as short as possible (Image 3).
Sitting down
Care of the product
The surface of the product can be cleaned with warm
water or a soap solution. If disinfection is needed,
70 % ethanol, 45 % isopropanol or similar should be
used.
6
1
ReTurn7500, with opening
for hooking of ReTurnBelt
To toilet/shower chair
For transfers to the toilet, space is allowed for the caregiver to assist the user with the pants. The
back also has a small recess that allows the user to get close to the toilet and achieve a good
seated position.
2
Brake the wheels on the ReTurn. Ensure that the user is stand-
ing in a secure position facing the ReTurn, so that the locking
strap is loosened. Undo the clasp and remove the strap from
the ReTurn. Fold it under the edge of the belt, so that it does not
catch on anything. Help the user into a seated position with the
help of the ReTurnBelt.
Medical Device Class I
Medical Device Class I. The product complies with the
requirements of the Medical Devices Directive 93/42/EEC.
Contact your local distributor if you have any questions
about the product and its use. See www.handicare.com for
a complete list of distributors.
Expected lifetime
Up to 10 years of normal use
3
SystemRoMedic
M A N U A L
TM