MPMan EB1 Mode D'emploi page 7

How to ASSEMBLE THE BATTERY
Before using the charger locate the voltage selector switch (Li-lon) on the back of the charger. Select
either 115 Volts or 230 Volts depending on the country you reside in. Using the wrong Voltage setting
will permanently damage the charger and/or electrical components on the hybrid electric bicycle.
EN
1: Use the matching charger
2:Insert the round plug into E-bike first and then insert the charger plug into electrical socket
3.Normal Statue of Charger, with Green Light on
4.Under Charging, the right situation is Red Light on (attention: during the charging, if the green light on means wrong,
while when the battery charged full, the green light on.)
5.the flute and the convex part should be matched well
Notes:
1.The battery is removable: the battery can be charged inside of the e-bike frame and can be also pulled out to charge separately.
2.Anti-theft system of the battery: there is hole under the frame, where we can use the key to lock it, which can keep the battery
from stealing.
3. LG battery, the core inside is produced by LG, and imported from Korea. We have the certificate to prove it.
11
All manuals and user guides at all-guides.com
Folding and Unfolding
Folding
EN
12