MPMan EB1 Mode D'emploi page 4

BEFORE YOU RIDE
ABOUT THIS MANUAL
EN
It is important for you to understand your new bicycle. By reading this manual before you go out on your first ride, you'll know how
to get better performance, comfort, and enjoyment from your new bicycle.
It is also important that your first ride on your new bicycle is taken in a controlled environment , away from cars, obstacles,
and other cyclists.
GENERAL WARNING
Bicycling can be a hazardous activity even under the best of circumstances. Proper maintenance of your bicycle is your
responsibility as it helps reduce the risk of injury. This manual contains many "Warning " and "Caution" concerning the
consequences of failure to maintain or inspect your bicycle. Many of the warnings and cautions say "you may lose control
and fall". Because any fall can result in serious injury or even death, we do not repeat the warning of possible injury or
death wherever the risk of falling is mentioned.
Warning: this product might be limited to use on private road(check the regulations in force in the territory of use).
We recommend using suitable protective equipment.
GENERAL WARNING
It is a tragic fact that most bicycle accidents involve children. As a parent or guardian, you bear the responsibility for the
activities and safety of your minor child. Among these responsibilities are to make sure that the bicycle which your child is
riding is properly fitted to the child; that is in good repair and safe operating condition; that you and your child have learned,
understand and obey not only the applicable local motor vehicle, bicycle, and traffic laws, but also the common sense rules
of safe and responsible bicycling. As a parent, you should read this manual before letting your child ride the bicycle. Please
make sure that your child always wears an ANSI,ASTM,SNELL approved bicycle helmet when riding.
5
All manuals and user guides at all-guides.com
Your new bicycle was partially assembled in the factory and then partially disassembled for shipping. You may have
purchased the bicycle already fully assembled and ready to ride OR in the shipping carton in the partially
disassembled form. The following instructions will enable you to prepare your bicycle for years of enjoyable cycling.
For more details on inspection, lubrication, maintenance and adjustment of any area please refer to the relevant
sections in this manual. If you have questions about your ability to properly assemble this unit, please consult a
qualified bicycle service specialist before riding. If you need replacement parts or have questions pertaining to
assembly of your bicycle, call the service line direct at:
Typical Tools Required:
- Phillips head screw driver
- 2.5mm,3mm,4mm,5mm,6mm & 8mm Allen keys
- Adjustable wrench or a 8mm, 9mm,10mm,13mm,14,
15mm & 17mm open/box end wrenches
- A pair of pliers with cable cutting ability
(Note: those tools are not included in the box, users
need to prepare them themselves.)
EN
6