Publicité
Les langues disponibles
Les langues disponibles
EN
19
V-brake
1. Grab brake handle
Observe the e-bike brake clip of both sides carefully,
see if they can rebound at the same time; if one side
does not rebound or rebound slowly, it indicates the
strength on both sides are not even, which will lead to
friction on the side of the wheel, resulting in slow speed
of riding. The solution is to adjust the small screws on
the two sides of the clip with flat-blade screwdriver;
clockwise is to increase elasticity, and conversely,
it reduces elasticity. It's better to remove the spring when
adjusting it, because using hand can do it.
All manuals and user guides at all-guides.com
2.F/R brake
Grab the brake handle to feel the strength, see if it's appropriate.
It's better to make the rear brake a little tighter than the front
brake; if it's not like that, the easiest way to adjust it is to adjust
the screw on the joints between the brake handle and wire;
turn it clockwise, it will get loose; turn it counterclockwise,
it will get tight. And watch out that there is a small ring, through
which we can fix the adjusting screw.
3.The position of the brake pad
Check if the brake pad is facing the center of the rim, if not, adjust
it with inner hexagonal tool.
EN
20
Publicité
