V2 MR2 Mode D'emploi page 6

EU DECLARATION OF CONFORMITY
The manufacturer V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that the products:
MR2-U-433, MR2-U-868
comply with the following directives:
2014/53/EU, ROHS-3 2015/863/EU
Racconigi, 01/10/2022
Legal representative, V2 S.p.A.
Lauro Buoro
DISPOSAL
As for the installation operations, even at the end of this product's
life span, the dismantling operations must be carried out by
qualified experts. This product is made up of various types of
materials: some can be recycled while others need to be disposed
of. Find out about the recycling or disposal systems envisaged by
your local regulations for this product category.
Important! – Parts of the product could contain pollutants or
hazardous substances which, if released into the environment,
could cause harmful effects to the environment itself as well as
to human health. As indicated by the symbol opposite, throwing
away this product as domestic waste is strictly forbidden. So
dispose of it as differentiated waste, in accordance with your
local regulations, or return the product to the retailer when you
purchase a new equivalent product.
Important! – the local applicable regulations may envisage
heavy sanctions in the event of illegal disposal of this product.
TECHNICAL DATA
Frequency
Temperature
Sensibility
S/N
Size
- 6 - ENGLISH
433,92 MHz / 868,30 MHz
-20 ÷ +60°C
≥ -103 dBm
> 17dB @ 100dBm m=100%
52 x 35 x 15 mm
PRODUCT DESCRIPTION AND
INTENDED USE
This receiver is part of the MR series by V2 SPA.
The receivers in this series are intended for use on V2 control
units.
Any other use is improper and prohibited!
• Operates with Royal or Personal Pass series transmitters:
the first remote control to be memorised determines the
mode of operation; Royal or Personal Pass.
Personal Pass Version:
• It is possible to store up to 1008 different codes with
self-learning mode
• Memory full warning: the receiver blinks 15 times
• Self-learning of transmitters managed by radio
• Management of the substitutive transmitter
• It is possible to enable or disable the ROLLING CODE mode
• Basic programming using button P1 or advanced
programming using the PROG2 (version 3.6 or newer)
programming device and WINPPCL software (version 5.0 or
newer)
m
ATTENTION: Use the receiver MR2 only with V2
equipments
P1 L1