Publicité
Les langues disponibles
Les langues disponibles
Setting the calendar
To set the perpetual calendar, please follow the
procedure described here very carefully.
During the different setting steps, you must set each
!
parameter (date, month...) to the day preceding the
desired date. This is necessary because the final
step when correcting the watch is to set the hour by
passing midnight (therefore jumping ahead one day)
to be sure that the hour set is before or after noon.
Under no circumstances should corrections be made
to the month (pushbutton I), the date (pushbutton II),
the day of the week (pushbutton III) or the moon
phases (pushbutton IV) when the watch displays
between 22:00 and 01:00 (morning).
1. Temporary time setting
E crown X in position X2
Temporarily adjust the hour by placing the crown X in position
X2 to display the hours and minutes outside the 22:00 to 01:00
(morning) period. Reposition the crown X to position X1.
English
Publicité
