Publicité
Les langues disponibles
Les langues disponibles
Starting the watch
The CLASSIQUE 7327 is a self-winding mechanical watch.
English
When first starting your watch, we recommend winding the
watch manually to reach a certain portion of the reserve,
and then the self-winding system will complete the power
reserve while you are wearing the watch.
Crown X in position X1. This position makes it possible
to manually wind the movement. Before manipulating the
watch, if it is stopped, wind the crown 30 to 35 times by
turning the crown clockwise (
the watch it will wind itself and automatically achieve its full
autonomy. When unworn, following a complete winding, the
watch will stop after about 45 hours.
Your CLASSIQUE 7327 is guaranteed to be water-
!
resistant to 3 bar (30m), as long as the crown is in
position X1.
). Then, by simply wearing
Setting the time
To set the watch following a change in time zone, daylight
savings, or any other hour change not requiring a date
correction, please follow the procedure below. If the date
must also be corrected, please refer to the instructions
under "Setting the calendar".
Place the crown X into position X2, then turn the crown
clockwise (
) or anticlockwise (
forward or backward to the desired hour. To set a precise
time, ensure that the last rotation of the crown was in an
). Then push the crown X into
anticlockwise direction (
position X1. Once this is done, turn the crown X one time
downwards (
) to ensure it turns freely.
Pay attention to whether the hour is before or after
!
noon. We recommend not passing midnight in the
counterclockwise direction (
If the watch is turned past midnight and the indicated date
is no longer correct, follow the instructions under "Setting
the calendar".
) to move the hands
).
Publicité
