Publicité
NexPolar ME Bus
Table of functions and user parameters
Function
Parameter
Mode
Homeantifreeze
Ambient antifreeze tem-
perature
Set point adjustment
frequency reduction
mode
Frequency reduction
6
Room mode
7 Lock
Room control set point
8 Lock
Room set point
9 Lock
Relative humidity value
10 Lock
from the sensor
Outdoor temperature
11 Lock
Outdoor temperature -
12 Lock
GMC
Room sensor temperature
13
adjustment
Day period
14
"At home" temperature in
15
heating mode
"At home" temperature in
16
cooling mode
"Night" temperature in
17
heating mode
"Night" temperature in
18
cooling mode
"Away from Home" tem-
19
perature in heating mode
"Away from Home" tem-
20
perature in cooling mode
Room set point
21 Lock
Last alarm code
22 Lock
Alarms log
23 Lock
In case of parameters which are read-only and cannot be edited by user, key pad lock ( Lock) icon is displayed on the screen.
The list of Read-only parameters is given below: 7, 8, 9, 10, 11, 12, 21, 22 and 23
All manuals and user guides at all-guides.com
Description
1
This parameter allows you to select the mode
0. Off
2. Cooling
3. Heating
2
This parameter enables the ambient antifreeze option when the sy-
stem is off:
1. NO. Disabled
2. YES. Enabled
3
This code allows you to select the temperature threshold below
which the ambient (0/+ 2 °C hysteresis) antifreeze starts
4
Changing the water set point on the basis of the temperature taken
by the thermostat
5
This code provides the information whether the mode is activa-
ted: Night/Reduction of the frequency
1. Not active
2. Active
Value of the compressor's frequency reduction in %
The control panel displays these parameters
1. At home
2. Night
3. Away from home
This code is the control room set point determined by pressing the
home, night, away buttons
This is the room air temperature read by the thermostat sensor
This is the relative humidity value from the thermostat sensor
Outdoor Temperature measured by the sensor
Outdoor temperature read by the GMC board
Correction of the temperature read to correct errors due to the posi-
tion of the thermostat.
This parameter specifies the number of periods per day that should
be activated for the timing programme:
2
4
6
AT HOME set point temperature in heating mode
AT HOME set point temperature in cooling mode
NIGHT set point temperature in heating mode
NIGHT set point temperature in cooling mode
AWAY FROM HOME set point temperature in heating mode
AWAY FROM HOME set point temperature in cooling mode
Room set point
Shows the last alarm code
Shows the 4 most recent error codes
52
Icon
Value range
Min
Max
Current mode
-
-
antifreeze:
1
2
°C
6°C
12°C
°C
-5°C
+5°C
1
2
50%
100%
Arrow depending
1
3
on the Touch 'N
Go selected
°C
12°C
38°C
°C
-20°C
50°C
%
0
100
°C
-30°C
90°C
°C
-20°C
65°C
°C
-5°C
5°C
2
6
°C and the At Home
12°C
38°C
arrow
°C and the At Home
12°C
38°C
arrow
°C and the
12°C
38°C
night arrow
°C and the
12°C
38°C
night arrow
°C and the away
12°C
38°C
from home arrow
°C and the away
12°C
38°C
from home arrow
°C
12°C
38°C
-
-
-
-
Set va-
lue
0
1
6°C
0°C
1
100%
1
20°C
0°C
4
20°C
24°C
18°C
26°C
15°C
28°C
20°C
Publicité
