NexPolar ME Bus
Position of the supplied ferrite
The ferrite must be instlled by the Installer who
will operate according to the rules of good prac-
tice and current legislation.
Unità 4 B - 6 B - 8 B
board/carte LEI
connector/connecteur RS-485
Example of installation
Exemple d'installation
stainless support
support en acier
ferrite/ferrite
The ferrite must be installed as close as possible to the
HER board.
Insert in the ferrite the RS-485 connecting cable and
connect it later to the LEI board.
Make two turns of the RS-485 wire in the ferrite.
All manuals and user guides at all-guides.com
board/carte LEI
cavo/cable
36
Position de la ferrite fournie
La ferrite doit être installé par l'installateur qui
travaillera selon les règles de bonnes pratiques
et la législation en vigueur
Unità 12 B
board/carte LEI
connector/connecteur RS-485
board/carte LEI
connector/connecteur RS-485
cable/ câble
La ferrite doit être installé le plus près possible à la carte
LEI.
Empiècer dans la ferrite le câble de connexion RS-485 et
aprèe le connecter aà la carte LEI.
Faire deux tours du fil RS-485 fil dans la ferrite.
board/carte LEI