Marantz SR4320 Mode D'emploi page 10

NAMES AND FUNCTIONS
FRONT PANEL
q POWER ON/OFF switch and STANDBY
indicator
Press the button to turn the power ON, and press again to turn it OFF. If
the POWER switch is in the ON position, the power of this unit can be
turned ON/OFF by pressing the POWER button on the remote control
unit.
When this unit is in the standby mode with the POWER switch set to the
ON position, pressing one of the FUNCTION SELECTOR buttons also
allows to turn the power on.
The STANDBY indicator lights up when this unit is in the standby mode
(power OFF) by the remote control unit.
w PHONES jack for stereo headphones
Conventional dynamic headphones can be plugged in here.
Note:
When using headphones, the speaker A and/or B are switched
automatically to OFF and the sound from the speakers is muted.
The speaker A and/or B return to the previous setting as soon as the
plug is removed from the jack.
e MULTI-JOG control knob
Turn the control (BALANCE, TREBLE or BASS) knob selected by the
JOG MODE button to adjust (the balance, treble or bass).
r Function selector buttons
These buttons are used to select the sources. The selected source name
will be displayed on the front display.
The video function selector, such as DVD, VCR and DSS, selects video
and audio simultaneously.
Audio function sources such as CDR/MD, TAPE, CD, PHONO and
TUNER may be selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound from one source with
a picture from another.
Choose the video source first, and then choose a different audio source
to activate this function.
t JOG MODE button
Press this button to adjust BALANCE and TONE CONTROL (BASS/
TREBLE). Each time this button is pressed, the mode changes as
BAL (BALANCE) → TRE (TREBLE) → BASS → BAL (BALANCE). If this
button is pressed in Source Direct Mode, Source Direct is cancelled.
y SPEAKERS (system A or B) button
Press this button to select speaker system(s) to use. Each time this
button is pressed, the selected speaker(s) is changed as, only A is on
→ only B is on → both A and B are on → both A and B are off. The
corresponding indicator(s) of the active speaker system(s) light.
If headphones are connected, both A and B are set off automatically.
u S (Source)-DIRECT button
When this button is pressed, the audio signal will bypass the balance
and tone control circuit to provide the pure sound quality.
To return not to bypass the balance and tone control circuit, press
S-DIRECT button again or press JOG MODE button.
i SLEEP (Sleep timer) button
This button is used for setting the sleep timer.
o MUTE button
Press this button to mute the output to the speakers. Press it again to
return to the previous volume level.
!0 CLEAR button
Press this button to clear the tuner preset station.
!1 MEMORY button
Press this button to enter the tuner preset memory numbers and station
names.
All manuals and user guides at all-guides.com
4
!2 TUNING/PRESET up ( ) and down ( )
buttons
During reception of AM or FM, you can scan the other frequencies or
select another preset station pressing these buttons.
!3 F (Frequency)/P (Preset) button
During reception of AM or FM, you can change the function of the UP/
DOWN buttons for scanning frequencies or selecting preset stations by
pressing this button.
!4 MODE button
Press this button to select AUTO mode or MONO mode when the FM
band is selected.
!5 SPEAKERS indicator
These indicators show active speaker system(s).
!6 DISPLAY OFF indicator
Lights up when you select "Display off".
!7 Infrared sensor
This sensor receives infrared signals from the remote control unit.
!8 VOLUME control knob
Adjusts the overall sound level. Turning the control clockwise increases
the sound level.
!9 Display
DISPLAY
a TUNED indicator
This indicator illuminates when a station is being received with sufficient
signal strength to provide acceptable listening quality.
b STEREO indicator
This indicator illuminates when an FM station is being tuned in stereo
condition.
c MEMORY indicator
When the MEMORY button is pressed, this indicator blinks for about 5
seconds.
d SLEEP indicator
This indicator lights up while the sleep timer function is in use.
e Frequency/Character display
This displays the selected station frequency or the corresponding words
when selecting a program source.
f Preset number display
Shows the selected preset number.
g RDS indicators
These indicators illuminate when this unit is receiving RDS data.