Télécharger Imprimer la page

Austroflamm Colin Manuel D'instructions page 10

Publicité

Les langues disponibles

Les langues disponibles

english
3.
CORRECT OPERATION OF YOUR STOVE
The operation is described in the enclosed user manual.
Accessories
You can obtain floor plates made of glass or steel, and care products from your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your stove functions
properly and safely.
The fireplae must not be altered.
Maintenance
To clean the glass, please use a specialised product such as Thermohit glass cleaner. Lacquered surfaces are to be
cleaned only with a cloth (may be damp).
ATTENTION: Only gaskets in good order ensure the proper function of your stove!
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if necessary more
often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned regularly by the chimneysweeper.
Your chimneysweeper will inform you of the necessary inspection intervals. An expert should inspect the stove
annually.
Problems and solutions
Problem
door glass gets sooty too fast
stove does not get enough
combustion air
stove smells strongly and there is
smoke on the outside surface
exhaust gas emission while
putting more wood on the fire and
during operation
All manuals and user guides at all-guides.com
7
possible reason
bad chimney draught
incorrect use of the combustion air
supply lever
wood logs are too large
operating temperature was not
reached
chimney draught not sufficient
stove is sooted inside
stove is dusty/dirty
chimney draught not sufficient, flue
pipe connection leaky
the stove door was opened before
the wood has burnt down to
embers
Colin, Jay, Mel, Minh, Rikk, Sam
solution
generally: door glasses must be cleaned with
Austroflamm glass cleaner from time to time
(depending on the frequency of use)
contact your chimney sweep (elongate
chimney/draught metering)
please operate air lever according to user's
instructions (if secondary air is closed, the door
glass soots rather fast)
keep to the max. fuel quantity according to user's
instruction
more fuel, use dry wood (< 15 % residual moisture),
attend air regulation
contact your chimney sweep (elongate
chimney/draught metering)
more fuel, use dry wood (< 15 % residual moisture),
attend air regulation
there may be some odour development during the
first operations
cleaning before the heating season starts!
inspect joints and seal up again if necessary
check chimney draught, review operating - for info
video follow:
http://www.austroflamm.com/de/Video/index.html
put more fuel wood into the combustion chamber
only if there are only embers left (no more visible
flame)

Publicité

loading

Ce manuel est également adapté pour:

JayMelMinhRikkSam