Publicité
Les langues disponibles
Les langues disponibles
LVLD2
6
Strainer and P-Trap
7
Adjust Temperature with Water Running
This valve is NOT factory preset.
Upon installation, the temperature
of this valve must be checked and
adjusted to ensure delivery of a
safe water temperature. Water
in excess of 110°F (43°C) may
cause scalding.
10
Strainer
A
Loosen Cap Screw about 1/4" (4-6
turns) and lift up cover (do not
remove).
B
Using cover, turn cartridge gently until
desired water temperature is reached.
Do not turn past stops as this may
damage unit. Push cover down and
tighten screw.
8/25/2020
A
Attach the strainer screw
to the strainer. Do not
overtighten.
B
Bradley • 215-1778 Rev. K: ECO 20-08-045
Installation
Thread the strainer screw
through the boss on the
drain adapter and secure
the strainer to the bowl.
H
C
Publicité
