Publicité
Les langues disponibles
Les langues disponibles
6. Turn the control cage clockwise, if the hotspot is too
much on the right side.
7. Turn the control cage counterclockwise, if the
hotspot is too much on the left side.
18
8. Make sure that the hotspot is equaly applied on the
surface for correct adjustment.
9. Tighten the adjustment lever and the 3 nuts when
the control cage is in correct position.
To stop the product
1. Push the abrasive control cable to close the abrasive
To operate the abrasive valve on
valve. Refer to
page 12 .
2. Push the OFF button to stop the blast motor.
2087 - 002 - 05.04.2023
Publicité
