Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Astsaege_Elektro_468283.book Seite 51 Montag, 24. Oktober 2016 9:44 09
1
2
6
• When separating thicker branches, make
the first cut from below (1). Then cut
through from above (2) and finally sepa-
rate the remaining stump (3).
DANGER! Risk of injury! Branches
that are high up or under tension can
wedge the saw chain in the wood!
Cleaning and maintenance
DANGER! Risk of injury! Before
any maintenance or cleaning work:
– Pull out the plug.
– Let the device cool down.
DANGER! In the interest of your
own safety! Only perform the main-
tenance work described here your-
self.
Any other work, especially motor
maintenance and repairs must be
performed by a trained professional.
Improper work can cause damage to
the device and thus also injuries.
Cleaning and maintenance overview
After each use
What?
How?
► Cleaning the de-
Clean the device
vice – p. 51
Regularly, depending on the conditions of
use
What?
How?
Re-tension saw chain ► Re-tensioning the
saw chain – p. 51
► Cleaning the oil
Clean oil guide
groove of the saw rail.
guide groove of the
saw rail – p. 51
► Sharpening the
Sharpen the saw
chain.
saw chain – p. 51
Cleaning
Cleaning the device
– Remove coarse dirt.
– Wipe down the device with a slightly
damp cloth.
Cleaning the oil guide groove of the saw
3
rail
– Remove the saw rail.
– Clean dirt from the oil guide groove of the
saw rail with a suitable tool. (plastic spat-
ula, do not use any steel tools!)
– Replace saw rail(► Assembling the saw
rail and saw chain – p. 48).
Re-tensioning the saw chain
► P. 5, item 8
– Lift the tip of the saw rail slightly.
– Tighten the tensioning screw for chain
tension (18) until the chain lies on the
underside of the saw rail.
– Tighten the screw (17).
Sharpening the saw chain
Storage and transport
Storage
• Let the device cool down before you
store it.
• Store the device as horizontally as possi-
ble.
Longer downtimes
If you are not going to be using the device for
a while, remove the chain oil from the device.
Store the device in a dry place.
Transport
If you are transporting the device in a vehicle:
– Slip the protective cover onto the cutting
tool.
– Secure the device against slipping.
– If possible, use the original packaging for
dispatching.
DANGER! Danger of death! Spe-
cial tools are required to sharpen the
saw chain; these guarantee that the
chain cuts at the correct angle and
depth. Have the saw chain sharp-
ened by a professional!
A worn or improperly sharpened
chain can cause rebounds. Severe or
even fatal injuries can be the result!
DANGER! Risk of injury! Make sure
that unauthorized persons do not
have access to the device!
GB
51
Publicité
