Publicité
Les langues disponibles
Les langues disponibles
Installation
Connecting the Antenna / Cable to the RF IN Terminal (VCR)
Use this configuration when connecting the projection display to a cable TV system using a VCR.
In from cable
TERMINAL ON
THE BACK OF
THE CABLE BOX
Note:
• When the RF coaxial cable is connected to the projection display VHF/UHF terminal via a cable box or VCR, set the TV channel
to CH3 or CH4. This does not apply when signal is input from VIDEO INPUT.
14
All manuals and user guides at all-guides.com
Connect the cable from the Output
terminal on the back of the Cable Box
or antenna/cable system to the Antenna
input terminal on the back of the VCR.
↑ TO VCR
CABLE BOX
VCR
Or
↑ TO VCR
Incoming Cable
from Antenna or
Cable TV System
Publicité
