Publicité
Les langues disponibles
Les langues disponibles
Installation
Notes on con nec tions
• Turn off the power supply for all com po nents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the component or available as an
option, you may need to fashion a cable to suit the component concerned.
• Read the instruction manual for each system component care ful ly before connecting it.
• If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In this case, it will
be necessary to connect a TBC (time base corrector).
Connecting the Antenna / Cable to the RF IN Terminal (No VCR)
Antenna Connection
For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor
antenna is recommended.
VHF Antenna
Mixer
CAUTION
When using "Nut type" RF coaxial cables, tighten with fingers only. Overtightening may damage terminals.
12
All manuals and user guides at all-guides.com
UHF Antenna
RF Coaxial Cable
VHF/UHF TERMINAL
ON THE BACK OF THE
PROJECTION DISPLAY
Publicité
