Motorola APX Next PMPN4640 Serie Guide D'utilisation page 14

MN009407A01-AB
Chapter 2 : Securing the Radio in the Vehicle Charger
Chapter 2
Securing the Radio in the Vehicle
Charger
The APX Next vehicle charger is equipped with a feature that reduces the risk of a portable radio
or battery in the pocket from becoming dislodged and potentially hazardous in the event of a vehicle
collision.
Operators are instructed to follow the vehicle charger installation instructions.
Prerequisites:
Before securing the radio in the vehicle charger, you must be familiar with the followings:
• The ballistic nylon strap - Tri-Glide adjustment between battery alone or radio with battery attached
• The retention housing - latch
• The engagement bar - faceplate
When the vehicle charger is not in use, the latch may be engaged to the top engagement bar on the
faceplate.
To use the vehicle charger, disengage the latch from the top engagement bar on the faceplate.
Procedure:
• The followings are the procedures for portable radio or battery alone.
1 Insert the portable radio or battery alone into the charger pocket.
Item
Large display models. See
Next Vehicle Charger with Radio on page
15
Battery alone (with adapter). See
Installation of Lithium-Ion Battery into the
PMPN4649_Adapter on page 15
ure 6: APX Next Vehicle Charger with Bat-
tery and Adapter on page 16
• The followings are the procedures for radios with an antenna installed.
1 Loop the strap between the base of the antenna and base of the channel selector.
2 Engage the latch onto the top engagement bar on the faceplate.
3 To secure the radio with battery attached within the vehicle charger, adjust the strap through
the Tri-Glide.
14
Description
Figure 4: APX
-
-
Figure 5: Contact faces downwards
and Fig-
Large LCD display faces upwards.
Main speaker and battery contacts face
downwards.