Motorola APX Next PMPN4640 Serie Guide D'utilisation page 12

MN009407A01-AB
Chapter 1 : Vehicle Charger Overview
1.1
Vehicle Charger Specification
Table 1: Specification
Parameter
Input Voltage
Maximum Charge Rate
Size
Weight
Operating Temperature
A+ Inline Fuses
Ignition Sense Inline Fuse
Vehicle Repeater System (VRS)
Output
1.2
Motorola Solution Authorized
APX Next vehicle charger is designed and approved to charge the following batteries:
Table 2: Motorola Solutions Authorized Batteries
Battery (PN)
NNTN9216
NNTN9089
NNTN9090
NNTN9217
PMNN4812
PMNN4816
PMNN4817
PMNN4818
NOTE:
To engage into the vehicle charger for proper charging, the battery requires battery adapter,
PMPN4649_.
The charger uses a microprocessor to sense the type of battery inserted and control the rate of charge
accordingly. A battery is charged at a rapid rate until it is more than 90 % charged and then it trickles
the charge until the battery is more than 95 % charged. The charger then switches to a maintenance
charge mode to keep the battery fully charged.
12
Description
12 - 24 V
Up to 3000 mA ± 15 %
3.8" W x 3.8" H x 5.4" D
1.2 lbs (544.31 g) approximately
+41 °F to +113 °F (+5 °C to +45 °C)
5 Amp (Littelfuse 235 series, MPN: 0235005.MXP)
0.25 Amp (Bussmann AGC series, MPN: AGC1/4)
Open Circuit - Output Voltage (VVrs)
7.4 V typ
Chemistry
Lithium-Ion
Lithium-Ion
Lithium-Ion
Lithium-Ion
Lithium-Ion
Lithium-Ion
Lithium-Ion
Lithium-Ion
IMPRES 2 batteries with self-calibration and recondition icon on the bat-
tery label does not require periodic calibration and reconditioning in the
IMPRES 2 desktop charger.
™
IMPRES 2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes