Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Replacing the light bulbs.
Light cover
On some models
Light cover
On some models
36
Oven Light
Replace the burned-out bulb with a 120 volt, 20-watt
halogen bulb (WB36X10213), available from your
GE supplier.
To replace the oven light, first disconnect the
1
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the top grille by taking out the screws
2
on top of the grille that hold it in place and
sliding the grille to the left (opening the door
makes grille removal easier).
Next, remove the light cover.
3
On some models, the light cover is located
in the center of the top opening. Remove the
screw that secures the light cover and lift the
cover off.
On some models, the light cover is located at the
left of the top opening. Lift the cover off.
Pinch the clips that hold the light socket in
4
place and lift the socket out.
Remove the bulb from the light socket by
5
pulling straight out. Replace with the same size
and type bulb, then replace the light socket and
cover.
Replace the grille and screws. Connect electrical
6
power to the oven.
Publicité
