Publicité
Les langues disponibles
Les langues disponibles
Dynamic Heat Control™ installation
EN
3.) Insert the high limit switch into the bracket and secure
with two fasteners (supplied).
5.) Install high limit switch assembly to the bracket install location in the upper left hand corner of the
appliance. Secure high limit switch assembly with a supplied screw as shown.
IMPORTANT:
After installing the Dynamic Heat Control™ Kit, ensure appliance is clean from dust, debris, etc.
before continuing with the appliance installation. Take precautions to ensure framing or finishing
dust and debris does not enter the air outlet openings or deflectors.
Check and clean appliance before operation.
Re-install safety barrier. "Refer to safety barrier installation / removal" in the installation manual.
12
W415-1739 / C / 08.03.17
All manuals and user guides at all-guides.com
access side
4.) Locate the existing wire harness in the upper left corner
of the firebox as shown. Connect wires to the high limit
switch.
Publicité
