Lux Tools B-FS-51/43 Notice Originale page 49

All manuals and user guides at all-guides.com
Motorsense_302135_115326.book Seite 49 Mittwoch, 11. Januar 2017 10:23 10
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
Technical data
Item number
Motor stroke volume
Maximum motor output
Idling speed
Max. motor speed
• Impact knife
• Filament spool
Tank volume
Fuel consumption
Max. rotational speed for cut-
ting
• Impact knife
• Filament spool
External diameter of knife
Diameter of knife mount
Diameter of cutting area when
operating with a filament
Filament diameter
Required filament length
Acoustic pressure (L )*
PA
Noise output level (L )*
WA
Guaranteed acoustic power (L
113 dB(A)
Vibration**
• Right hand
• Left hand
Weight
Spark plug
*) The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks. Determination
of noise emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in
accordance with a normed test procedure and can be used in
order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation
of the exposure. The vibration emission value may fluctuate
from the specified value during actual use of the power tool.
These fluctuations will depend on the way in which the power
tool is used. Try to keep vibrations to a minimum. One method
of reducing the vibration load is, for example, limiting the length
of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and
Approved fuels
302 135, 115 326
51,7 cm³
1,5 kW
−1
3100 ±400 min
−1
11000 min
−1
9500 min
1100 ml
580 g/kWh
Mixing ratio 40:1, i. e.
Regular petrol mixed with two-stroke motor oil
−1
8300 min
1 l
−1
7100 min
2 l
3 l
255 mm
4 l
25,4 mm
5 l
430 mm
Instructions for fuels
2,4 mm
Fuels with ethanol mixtures (e. g. E10)
6 m
Fuels with high ethanol mixture are more aggressive
96,3 dB(A) than fuels with less or without ethanol mixture. Pos-
(K = 3 dB(A)) sibly painted surfaces and plastics can be strongly
affected or damaged. Moreover, fuel with ethanol
110,5 dB(A)
mixture strongly reacts to influential factors such as
(K = 3 dB(A))
light rays, temperature and storage time. Hence,
)*
WA these fuels should be stored only in allowed contain-
ers and in suitable place for not more than 30 days.
It is recommendable to empty the fuel tank as well as
the steam separator (carburettor) if combustion
< 4,8 m/s²
engine takes longer time to shutdown.
< 4,94 m/s²
All our devices are suitable for using the E10 fuel.
(K = 1,5 m/s²)
Fuels with ethanol mixtures (e. g. E10) for 2-
7,6 kg
Stroke-Motor
BOSCH L8RTF
2-Stroke-Motors (Motors with petrol lubrication)
Champion RCJ7Y
must be adjusted to the usage of fuel with high eth-
anol mixture (more than 5%, e.g. E10) by specialist
workshop. Thus, the country-specific environmental
conditions are to be considered and observed.
Special fuels for 2-stroke-motors
Pay attention to the details about required mixing
ratio in these instructions for use. Some completely
mixed fuels or special fuels (e. g. Aspen 2t or Stihl
Motomix) are provided only in mixing ratio of 1:50.
Spare parts
Spare parts are available from your local vendor.
Item number
310 401
310 127
396 729
times in which it is switched on, but is running without load).
Determination of vibration emission values in accordance with
EN 60745-1.
NOTICE! Risk of damage to the
machine! Use only the specified fuel.
Never use oil intended for car or outboard
engines.
Note: When used in a mixture, fuel will age
particularly quickly: therefore, do not mix
more fuel than you will consume within
1 month.
• Normal petrol, 91 octane (40 parts) If no regular
petrol is available, you can also use petrol with a
higher octane ratio.
• Two-stroke motor oil for air-cooled motors, high
quality
25 ml
50 ml
75 ml
100 ml
125 ml
Spare part
Knife
Filament
Filament spool (incl. fila-
ment)
GB
49