Bosch GTS1031 Consignes De Fonctionnement/Sécurité page 9

BM 2610014415 01-11 E:BM 2610012089 12-10 E 1/10/11 7:17 AM Page 9
1. pOWER SWITCH
Switch incorporates hole for use with padlock to pre-
vent accidental starting.
2. ElEVATION WHEEl
Elevates or lowers the blade. Also used to tilt the
blade 0 to 45 degrees.
3. blAdE bEVEl lOCK HANdlE
Locks the blade to desired bevel angle.
4. blAdE bEVEl SCAlE
Shows the degree the blade is tilted.
5. bASE
Supports table saw. Holes are provided in base to
bolt the saw to a workbench or stand. Includes inte-
grated carry and adjustment handles
6. TAblE EXTENSION lOCK HANdlE
Allows you to lock the table extension at desired dis-
tances. Also prevents use of table saw with un-
locked extension.
7. pUSH STICK
Allows you to rip smaller pieces of stock with a
greater level of safety.
FIG. 1
14
15
Great user manuals database on
getting To Know your Table Saw
11
12
13
1 2
-9-
UserManuals.info
8. TAblE EXTENSION
Provides a larger work surface for wider workpieces.
9. RIp fENCE
Exclusive Self-Aligning, Squarelock rip fence can be
easily moved or locked in place by simply raising or
lowering lock handle.
10. RIp fENCE SCAlE
Shows the distance from the blade to rip fence
through a convenient viewing and magnifying win-
dow. Lower portion of scale can be used up to 10
inches. Upper portion of scale is used for cuts be-
yond 10 inches.
11. SMART gUARd SySTEM
Consists of three key elements: Adjustable (3 posi-
tion) Riving Knife, Anti-Kickback Device, and Barrier
Guard Device. All of these are part of a modular sys-
tem that requires no tools to assemble or unassem-
ble. This Guard System must always be in place and
working properly for all thru-sawing cuts.
12. TAblE INSERT
Removable for removing or installing blade or other
cutting tools.
10
3 24 4
8
9
7
6
5