Thrustmaster MFD COUGAR Manuel De L'utilisateur page 11

IDENTIFYING YOUR MFD COUGAR
When you open the Control Panel, the relevant MFD's name flashes for 2 seconds, enabling
you to tell it apart from the other devices.
If you click on the Identify tab, the relevant MFD starts flashing, allowing you to locate it
easily.
ADJUSTING THE BACKLIGHTING INTENSITY
The backlighting for all buttons and identification LEDs can be software-adjusted or
hardware- adjusted.
ADJUSTING THE BACKLIGHTING FEATURE USING SOFTWARE
- In the Thrustmaster Control Panel, select the Backlit / LED Intensity tab.
ADJUSTING THE BACKLIGHTING FEATURE USING HARDWARE
(To adjust backlighting when playing)
- Simultaneously press buttons 14 + 15 + 25 to increase backlighting intensity
- Simultaneously press buttons 14 + 15 + 26 to reduce backlighting intensity
2 IDENTIFICATION LEDS
The MFD COUGAR features 2 LEDs (2), enabling users to easily identify and recognise the
relevant MFD.
Unless configured otherwise, both LEDs turn on or off according to the selected MFD's name
and number:
NAME and
NUMBER of MFD
F16 MFD 1
F16 MFD 2
F16 MFD 3
F16 MFD 4
F16 MFD 5
F16 MFD 6
F16 MFD 7
F16 MFD 8
This default mode can be modified by activating or deactivating the Left LED and Right LED
options in the Thrustmaster Control Panel.
LEFT-HAND RIGHT-HAND
LED
ON
OFF
ON
OFF
ON
OFF
ON
OFF
10/18
LOCATION in a cockpit
LED
OFF LEFT-HAND MFD #1
ON
RIGHT-HAND MFD #1
ON LEFT-HAND MFD #2
OFF RIGHT-HAND MFD #2
OFF
LEFT-HAND MFD #3
ON RIGHT-HAND MFD #3
ON
LEFT-HAND MFD #4
OFF
RIGHT-HAND MFD #4