Thrustmaster MFD COUGAR Manuel De L'utilisateur page 7

ATTACHING THE MFD TO A COCKPIT OR A SCREEN
1. Detach the attachment rods and remove the MFD from the base by fully unscrewing
the 2 attachment thumbscrews (6).
2. Detach the removable rod (10) located at the back of the MFD, on the device's upper
side, by fully unscrewing the 2 attachment screws (8) located to either side.
3. Remove the 4 bore covers (5) by pushing them out from the back, using a thin
screwdriver or a pin.
You can now attach the MFD using the 4 bores.
6/18