DeWalt DW743N Traduction De La Notice D'instructions Originale page 26

EnGLIsH
FLIP-OVER SAW
DW743N
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and
e
innovation make D WALT one of the most reliable partners for professional power tool users.
e
Technical Data
Voltage
UK & Ireland
Type
Power input
230 V tools
115–120 V tools
No-load speed min
Blade diameter mm
Blade bore mm
Blade body thickness mm
Blade tooth thickness mm
Riving knife thickness mm
Mitre (max. positions)
right
Bevel (max. positions)
Automatic blade brake time
Weight
Cutting Capacities
Mitre saw Mode (Fig. B)
Cutting angle
Straight cross-cut
Table turned 45° right for mitre cuts
Table turned 45° left for mitre cuts
Sawhead tilted 45° left for bevel cuts
Bench saw Mode
Max. ripping capacity left/right mm
Depth of cut at 90° mm
Depth of cut at 45° mm
Noise values and vibration values (triax vector sum) according to EN61029-2-11:
L (emission sound pressure level) dB(A)
PA
L (sound power level) dB(A)
WA
K (uncertainty for the given sound level) dB(A)
Vibration emission value a = m/s
h
Uncertainty K = m/s
The vibration emission level given in this information sheet has been measured in accordance
with a standardised test given in EN61029 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
24
DW743N DW743N
QS/GB LX
V 230 –
AC
V 230/115 115
AC
4 4
W 2000 2000
W 1700 1700
-1 2850 2850
250 250
30 30
2.2 2.2
3 3
2.3 2.3
left 45° 45°
45° 45°
left 45° 45°
s < 10 < 10
kg 37 37
Size of material Notes Workpiece place
against fence (X)
H mm B mm
20 180 No packaging piece
30 176
40 170
68 140
85 26 Cross-cut at max.
70 95
20 130
50 140
210/210 210/210
0–62 0–62
0–32 0–32
93 93
106 106
2.9 2.9
2 2.0 2.0
2 1.5 1.5
EC-Declaration of Conformity
Machinery Directive
Flip-Over Saw
DW743N
D WALT declares that these products described under Technical Data are in compliance with:
e
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-11:2012 +A11:2013.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information,
please contact D WALT at the following address or refer to the back of the manual.
e
The undersigned is responsible for compilation of the technical file and makes this declaration
on behalf of D WALT.
e
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
03.04.2018
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.

required
Denotes risk of electric shock.

Denotes risk of fire.
Safety Instructions
height
WARNING! When using electric tools basic safety precautions should always be followed
to reduce the risk of fire, electric shock and personal injury including the following.
Read all these instructions before attempting to operate this product and save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
General Safety Rules
1 . Keep work area clear.
Cluttered areas and benches invite injuries.
2 . Consider work area environment.
Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the
work area well lit (250 - 300 Lux). Do not use the tool where there is a risk of causing fire or
explosion, e.g., in the presence of flammable liquids and gases.
3 . Guard against electric shock.
Avoid body contact with earthed surfaces (e.g., pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions (e.g., high humidity, when metal swarf is being
produced, etc.), electric safety can be improved by inserting an isolating transformer or a (FI)
earth-leakage circuit-breaker.
4 . Keep other persons away.
Do not let persons, especially children, not involved in the work, touch the tool or the
extension cord and keep them away from the work area.
5 . Store idle tools.
When not in use, tools must be stored in a dry place and locked up securely, out of reach
of children.
6 . Do not force the tool.
It will do the job better and safer at the rate to which it was intended.
7 . Use the right tool.
Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes not
intended; for example do not use circular saws to cut tree limbs or logs.
8 . Dress properly.