Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
3
Open the A/V Mute slide all the way.
4
Press the
Power button
The
power light flashes green, then stays on.
NOTE: To shut down the projector, press the
unplug it. You don't have to wait for the projector to cool down.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or the Search button on the remote control to select the image
source.
NOTE: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the right.
2
To raise the image, press the blue foot release button and lift the front of
the projector. Release the button to lock the foot in position.
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
4
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely.
5
If your image looks like
projector to correct it.
power button on the projector or remote control.
Power light
or
or
power button twice, then
, you've placed the projector off to
or
, press the
buttons on the