3. HOW TO USE
INDOOR USE ONLY
•
To start the heater, put the switch on the position 1 (Low power) or on the
position 2 (High power)
•
Set the temperature with the thermostat.
•
To stop the heater, put the switch on the position 0.
Overheating protection:when the temperature is higher thanthe selected
temperature, the heater will automatically cut off.
After cooling, it will automatically work.
4. CLEANING & MAINTENANCE
•
Always disconnect appliance from the main when you clean it.
•
In order to avoid any hazard, only clean the appliance with a dry rag lightly
humidified.NEVER IMMERSE THE HEATER TO CLEAN IT
•
To avoid any electrical hazard, clean your appliance with a soft and clean rag to
remove the dust. You can also use a vacuum cleaner to clean the air openings.
•
Clean your appliance regularly.
5. DISPOSAL AND RECYCLING
HD20K
230V 50Hz
~
2000
W
IP24
EN
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
20