Function
TRIX H0 locomotives can be operated on all 2-rail
DC systems (track to NEM standards) with conven-
tional DC power packs (12 volt DC).
This locomotive is equipped with an electrical interface
connection for digital operation (NEM Standard 652)
and can be retrofitted with the 66833 Selectrix loco-
motive decoder.
The necessary maintenance that will comes due with
normal operation is described below. The headlights
have LED's and are maintenance-free. Please see
your authorized TRIX dealer for repairs or spare parts.
All manuals and user guides at all-guides.com
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by TRIX have been installed in TRIX pro-
ducts or where TRIX products have been converted
in such a way that the non-TRIX parts or the con-
version were causal to the defects and / or damage
arising. The burden of presenting evidence and the
burden of proof thereof, that the installation of non-
TRIX parts or the conversion in or of TRIX products
was not causal to the defects and / or damage arising,
is borne by the person and/or company responsible
for the installation and / or conversion, or by the
customer.
Safety Warnings
G
This locomotive is to be used only with an operating
system designed for it.
G
This locomotive must never be supplied with
power from more than one transformer.
G
Pay close attention to the safety warnings in the
instructions for your operating system.
5