SilverCrest SHTD 2200 B2 Mode D'emploi page 10

Please note, however, that the ionisation function will only work optimally if the
attachments (finger diffuser
interfere with the application of the ions to the hair. Therefore, use the hairdryer
without attachments for maximum ionisation effect.
Drying and styling hair
■ To quickly dry hair, we recommend first of all using a high blower and heater
setting for a short period. Also, place the Ionic switch-in
"
shape the hairstyle.
■ With the supplied styling jet
and style your hair. Fit the styling jet
the hair dryer so that it snaps into place and sits evenly on the hair dryer.
If you no longer require the styling jet
down and pull it off with a downwards snapping motion:
■ If you wish to dry your hair especially gently, or create a so-called "air-dried
wave", then use the finger diffusor
with a downwards snapping motion.
Fit the finger diffusor
so that it snaps into place and sits evenly on the hair dryer.If you no longer
require the finger diffusor
pull it off with a downwards snapping motion:
SHTD 2200 B2
/styling jet
". After drying the hair, switch to a lower blower and heat level to
by pushing it with light pressure onto the hair dryer
, wait until the appliance has cooled down and
) are removed as the attachment will
you can apply a directed airflow to shape
by pushing it with light pressure onto
, wait until the appliance has cooled
. Start by removing the styling jet
at the position
GB │ IE │ 7 ■