Bertazzoni P784I1M30NV Manuel D'installation Et D'instructions page 32

Special functions
Over-Temperature Protection
A temperature sensor has been installed to monitor the temperature inside the Induction
hob. When an excessive temperature is detected, the Induction hob will stop operation
automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item
(e.g. knife, fork, key) has been left on the hob, the hob automatically goes into standby in 1
minute. The fan will continue cooling the induction hob for a further 1 minute.
Auto Shutdown Protection
Auto shutdown is a safety function to protect your induction hob. It shuts down
automatically if you ever forget to turn off your hob. The default working times for various
power levels are shown in the below table:
Power level
Default working time (min)
When the pan is removed, the induction hob stops heating immediately and the hob will
automatically switch off after 2 minutes.
People with a heart pace maker should consult their doctor before using this unit.
Auto Pan Detect
This function automatically detects where the pot or pan is located. The bridge functions is
activated automatically, depending on the size of the pot or pan. You just need to power up
with the slider.
1~3 4~6
360 180
9
7~8 9
120 90