Bertazzoni P905I2M30NV Manuel D'installation Et D'utilisation page 40

Using the Pause function
The hob has a handy restart function to pause and restart the cooking process if you are
interrupted.
1. When the hob is on and working, press the pause key (C) ; all burners will stop
working and all LED indicators will show the symbol "=" .
2. Press the pause key (C) again; all parameters will return to their previous
settings.
Power Limitation Adjustment Instruction
(1.5kW / 2.8kW / 3.7kW / 4.5kW / 6.0kW / 6.5kW / 7.2kW / 9.0kW)
ATTENTION! : Only the authorized service representative
may make this adjustment!
Make sure the hob is switched off. The required power level can be set by carrying out the
following steps within 60 seconds:
Step Control Panel Operation
When the hob is turned off,
1
temperature manager key and
timer key.
The LED display shows the power
2
levels.
Press the + and - keys to choose
3 the power limitation.
4
Press pause key to quit
Display
Select
1.5kW/2.8kW/3.7kW/4.5kW/6.0kW/6.5kW/7.
2kW/9.0kW alternative
Quit setting
17