RIDGID 300 Compact Mode D'emploi page 20

300 Compact/1233 Threading Machines
3. Unscrew brush caps. Remove and inspect brushes.
Replace when worn to less than
mutator for wear. If excessively worn, have machine
serviced.
4. Re-install brushes/install new brushes. Reassemble
unit. Install all covers before operating machine.
Optional Equipment
WARNING
To reduce the risk of serious injury, only use equip­
ment specifically designed and recommended for
use with the RIDGID Threading Machines.
Catalog Model
No. No, Description
97075 815A 1/8" - 2" NPT, Self-Opening, RH Die Head
97065 811A 1/8" - 2" NPT, Quick-Opening, RH Die Head
97080 815A 1/8" - 2" BSPT, Self-Opening, RH Die Head
45322 815A 1/8" - 2" BSPT, Self-Opening, RH EUR. RT
97070 811A 1/8" - 2" BSPT, Quick-Opening, RH Die Head
97045 531 1/4" - 1" Bolt, Quick-Opening, RH/LH Die Head
97050 532 1 / " - 2" Bolt, Quick-Opening, RH/LH Die Head
1
4
67657 250 Folding Wheel Stand
58077 250 Folding Wheel Stand
92457 100A Universal Leg & Tray Stand
92462 150A Universal Wheel & Tray Stand
92467 200A Universal Wheel & Cabinet Stand
51005 819 Nipple Chuck, 1/2" - 2" NPT
68160 819 Nipple Chuck, 1/2" - 2" BSPT
For 300 Compact Only
84537 816 1/8" - 3/4" Semi-Automatic Die Head
84532 817 1" - 2" Semi-Automatic Die Head
67662 — 916 Groover Adapter Bracket
For 1233 Only
54437 728 2 / " - 3" NPT, Receding Self-Opening, RH Die Head
1
2
93562 928 2 / " - 3" BSPT, Receding Self-Opening, RH Die Head
1
2
— 419 Nipple Chuck
For a complete listing of RIDGID equipment a­
vailable for the 300 Compact or 1233 Threading
Machine, see the Ridge Tool Catalog online at
RIDGID.com or call Ridge Tool Technical Service
Department 844­789­8665., from the U.S. and
Canada
Thread Cutting Oil Information
Read and follow all instructions on the threading oil
label and Safety Data Sheet (SDS). Specific information
about RIDGID Thread Cutting Oils, including Hazard
Identi fi ca tion, First Aid, Fire Fighting, Accidental Release
Measures, Handling and Storage, Per sonal Protective
Equipment, Disposal and Transportation, is included
on the container and SDS. SDS is available at RIDGID.
com or by contacting Ridge Tool Technical Service
Department at 844-789-8665 in U.S. and Canada or
ProToolsTechService@Emerson.com.
18
/ ". Inspect the com-
1
2
Machine Storage
WARNING
The Threading Machines must be kept in-
doors or well covered in rainy weather. Store the machine
in a locked area that is out of reach of children and people
unfamiliar with threading machines. This machine can cause
serious injury in the hands of untrained users.
Service And Repair
WARNING
Improper service or repair can make machine
unsafe to operate.
The Maintenance Instructions will take care of most of
the service needs of this machine. Any problems not
ad dressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Authorized Inde-
pendent Service Center or returned to the factory. Only
use RIDGID service Parts.
For information on your nearest RIDGID Authorized
Independent Service Center or any service or repair
questions:
• Contact your local RIDGID distributor.
­ •­­Visit­RIDGID.com­to­find­your­local­RIDGID­contact­
point.
• Contact Ridge Tool Technical Service Department at
ProToolsTechService@Emerson.com, or in the U.S.
and Canada call 844-789-8665.
Disposal
Parts of the Threading Machine contain valuable ma-
terials and can be recycled. There are companies that
specialize in recycling that may be found locally. Dispose
of the components and any waste oil in compliance with
all applicable regulations. Contact your local waste man-
agement authority for more information.
For EC Countries: Do not dispose of electri-
cal equipment with household waste!
According to the European Guideline 2012/
19/EU for Waste Electrical and Electronic
Equipment and its implementation into na-
tional legislation, electrical equipment that
is no longer usable must be collected separately and
disposed of in an environmentally correct manner.
999-998-098.08_REV C